Protect Your Pride And Joy With The ghost immobiliser installation near me Immobiliser
Bmw x5 ghost installation installer (http://spectr-sb116.ru) Immobiliser can safeguard your prized item from theft. It’s discreet and does not require additional key fobs to operate.
The device utilizes buttons on your vehicle (steering wheel doors, door panels, and the centre console) to create a unique, changeable pin code sequence of up to 20 presses long. This will then authorize the start-up of your vehicle.
Simple PIN Code Change Process
With the growing rate of vehicle theft, many owners are looking to upgrade their security. There are a myriad of security devices that are sold aftermarket, from tracking systems to alarms and immobilisers. Not all of them are equally effective at protecting your car. While a tracking device can help you find your car in the event of theft, it does not prevent the crime from occurring in the first place. Immobilisers, on the contrary, do exactly what they claim on the tin: they shut off your car’s engine to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to steal your car.
The ford focus ghost installer device utilizes the buttons on your car to create a unique sequence that must be entered to allow the engine to begin. This can be done using the indicator stalk, window or heater buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the button sequence. This option is particularly useful when you need to surrender your car for valet parking or maintenance since the immobiliser is activated and not disabled.
The Ghost is a unique and ingenious device that is used in conjunction with the buttons on your vehicle rather than as a separate device. It’s not just an effective deterrent to theft of your vehicle however, it can be used on future vehicles you may own. This makes it a more cost-effective option than a traditional wheel lock.
Small, weatherproof device
The Autowatch Ghost Immobiliser is a high-tech security system that safeguards your pride & joy from key hacking and cloning. It also prevents ECU swapping. It is a small, weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to stop the motor. It can be plugged into the vehicle without the need for extra wiring and has been extensively tested to make sure it works with all vehicles. It is also resistant to jamming devices, which is an approach used frequently by thieves to get around the immobilisers in place.
The advantage of CAN data over traditional systems is that they work silently. It isn’t detected by sophisticated RF scanning or code-grabbing technology and is also unrecognizable by traditional diagnostic tools. The Autowatch ghost doesn’t emit LED indications and uses the buttons inside your vehicle such as steering wheel, centre console or door panels to create a unique, changeable disarm sequence. You can make this sequence up to 20 presses long for added security. The iPhone app lets you make only one, authenticated connection using the pairing code unique to the Ghost and communication between the two is secured.
The Ghost will stop car thieves from putting in an ignition key replacement or replacing the ECU to bypass the immobiliser. The engine will only start only if a valid PIN has been entered. It is possible to operate temporarily in Valet/Service mode (with parameters set, such as a 30mph speed limit) and, therefore, you can hand your car to a valet or service without needing to enter an entry code.
Tested for each vehicle
The Autowatch Ghost is the first aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device intercepts electronic signals that block the system of your vehicle from going through its normal initialization process until you enter a custom passcode. The system can be turned off or on through your smartphone’s app without the need for extra wires.
Standard factory immobilisers on automobiles function through an electronic transponder in the key that sends a signal to the ECU. If the correct code is transmitted the car will begin, but if a transponder is replaced by one from another vehicle the immobiliser will not recognise it. This makes it possible for the vehicle to start and be stolen. The Ghost immobiliser was created by a South African company at the top of security systems for vehicles technology. It shields you from hacking or key cloning, and even key theft. Only by physically towing your car away can thieves take it away, and they would still not be able drive it.
Ghost makes use of the buttons on your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to generate a unique PIN code that is changeable that needs to be entered before you are able to use your car. This is done without extra hardware, such as a keyfob. It can take up to 20 presses. It is also unrecognizable by diagnostic equipment and does transmit radio frequency signals, so thieves cannot make use of sophisticated RF scanners or code-grabbing technologies to identify that an installation has been made.
Contrary to physical anti-theft devices such as clamps or wheel locks Ghost is covertly integrated into the vehicle, so it cannot be taken away or disabled by thieves. It’s even more difficult to get rid of than a car alarm that requires disarming with a button sequence. This makes it a great alternative to an GPS tracking device which can be used to track your vehicle after it’s stolen.
Override of emergency PIN code
You don’t need to go far on social media to see stories or even videos of vehicles that have been stolen by car thieves using the most advanced technology tools available to them. This includes key-cloning devices and hacking devices that allow them to start your vehicle without the original keys.
Our Ghost immobiliser fights this issue and offers an additional layer of security to prevent your vehicle from being taken if it is targeted by thieves. It creates a unique pin code when pushing the buttons on your steering wheel, door panel, and on the centre console. This unique PIN must be entered together with your original key fob to stop the vehicle from beginning. The unique override pin can be found on a black plastic card which you will receive following the installation. It is simple to remember since there are no LED indicators.
The device is hidden in the wiring of your vehicle and doesn’t emit radio signals. This means it can’t be detected using diagnostic software that can determine what type of security systems you have installed. This makes it a great alternative to the tracker.
Contrary to other security systems which use a relay in engine bays, immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to disable the vehicle completely with the use of a digital block of commands to both the ECU and the engine.
These systems can also be linked to an analog alarm immobiliser, tracker or alarm. This must be specified prior to the installation. They are also service/valet mode compatible and a great alternative to a tracker when you have your car checked for repairs to an electrical issue at the dealer.
Service/Valet mode
In recent times, there has been a increase in the number of vehicles being stolen with no owner’s keys. It’s more easy than ever to take your joy and pride thanks to the availability of key cloning tools and door lock picks. We’ve developed the Autowatch Ghost Immobiliser to combat this. It blocks your vehicle from being driven even if your keys have been cloned.
It communicates directly to your cars ECU (Engine Control Unit) through the CAN data circuit. It’s completely silent since it doesn’t use radio frequencies or key fobs. It can’t be detected by diagnostics or any other hacking device. It also protects you from adding an ECU or key to circumvent the system, since only the PIN code allows the engine to start.
The device is hidden inside your car using existing buttons on the steering wheel, the centre console and door panels. Before you can start your car, you need to enter a unique and changeable PIN number that is up to 20 digits.
This is the first aftermarket CAN-bus immobiliser that is being designed. It will prevent your vehicle from being started or driven when you don’t enter a PIN code first. If the device is armed and you try to drive off it will display an indicator Ghost immobiliser installation on your dash which will flash on a regular basis for approximately 300m, if you enter your PIN code during this time, it will disarm the anti-hijack system and your vehicle will continue to drive just as normal. If you do not enter your PIN code at this time the indication will continue to flash and will require a new PIN code every attempt to start your car.