Sliding Patio Doors Repairs
Your sliding patio doors can bring the outdoors in to your home, and will increase its energy efficiency. However, with time, they could show signs of wear and tear that will require some maintenance.
Luckily, the majority of issues with sliding patio doors are simple to address. Find out how you can keep your sliding patio door repair service doors looking like new.
Dirty or damaged Tracks
One of the most frequent causes of sliding patio doors that won’t open is dirty or blocked tracks. Over time, the grit and grime of daily usage accumulates on the tracks and can cause the door to jam or even break down completely.
Regularly cleaning sliding doors and their tracks as part of your household chores can help reduce the accumulation. Begin by brushing or vacuuming large pieces of debris off the tracks. Then, use warm water and non-abrasive cleaning products like dish soap to wipe them down. A little vinegar added to your cleaning solution can also help remove stubborn dirt and grease stains.
If your sliding door not working smoothly after you have followed these steps, this could be a sign there is a more significant damage. This may require a professional to fix or replace the door. There are a few simple solutions you can try before calling in professionals to avoid costly repairs or replacements.
Place a mat under your sliding doors. This will help catch dirt before it gets to the tracks. Also, you should trim any plants or bushes near your sliding doors to limit the amount of debris trapped in the tracks. Close the door correctly to ensure that you don’t damage the rollers or wheels. By keeping your doors clean and lubricated you can prolong their lifespan significantly.
Misaligned Rollers
Occasionally it happens that a sliding patio door can become misaligned or gets stuck. Usually, this is due to obstructions such as dirt or other that can be easily fixed. Sometimes it’s due bent track or a bent roller. In this instance you can straighten the rollers by taking them off using the adjustment screws and then cleaning with the rubbing alcohol. These parts can be fragile.
If your doors are still sticking, you can lubricate the rollers. This will reduce friction and allow them to move more easily. Choose a silicone-based lubricant, as petroleum-based lubricants can attract dirt more quickly. It is essential to clean the rollers and tracks before lubricating.
After you’ve cleaned the rollers, you are able to reinstall them using their adjustment screws. Make use of the same lubricant you used to clean them. Be sure to push the rollers all the way into their channels when you reinstall them. You can test your door now and see if it moves smoothly.
If the problem continues it may be necessary to uninstall your door and examine the rollers and tracks for any other issues. If the tracks or rollers are badly bent they might need to be replaced. In such a case it’s a good idea to call in an expert for the installation.
Warped Glass
Sliding glass doors are ideal for bringing the outdoors into a room and letting natural light in however, they can also be vulnerable to damage that requires repair or replacement. Warping, cracking and fading are just a few of the most frequent issues. The materials that make up the sliding glass patio doors begin to deteriorate when exposed to sunlight, heat and other environmental elements. The most common cause of cracking is impact damage such as the impact of a lawnmowers blade or ball that is smashed into the door. Fading usually occurs due to repeated exposure to sunlight and other elements.
If you have sliding glass patio doors that are hard to open and close, this could be an indication that the rollers and tracks are not functioning properly. This could be due to the accumulation of dirt, rust, or debris in the track, wheels that are not aligned or a lack of lubrication. Cleaning the tracks and rollers clearing obstructions and applying silicone spray may help solve this issue.
Another reason that sliding patio repair near me doors might be difficult to open or close is because the locking mechanism is no longer working. This could be caused by misalignment or wear and tear, but a simple fix is to adjust the locking mechanism by turning the adjustment screws that are located at the bottom of the track.
Drafts or air leaks around your sliding patio door repair service near me door are a frequent issue that can decrease their energy efficiency. These issues are typically caused by worn-out weather stripping or poor alignment of the door. This issue can be easily fixed by replacing the weather stripping and realigning your doors.
Loose Handle
If the handle of a sliding door becomes loose, it could be quite frustrating and make it difficult for people to open the door. This is typically caused by an improperly aligned locking mechanism, which can be fixed by loosening the screws that secure it and then tightening them until they are snug against the door jamb.
Another common reason for a handle to become loose is that it has separated from the spindle that connects the handles’ exterior and interior. This is usually the result of a number of factors, including frequent use, wear-and-tear or just general aging. If the issue isn’t resolved promptly, it may eventually result in the entire handle becoming loose, and eventually falling off completely.
The best method to solve this problem is by first finding the screws that join the handles’ exterior and interior. They are typically hidden behind tabs made of plastic that can be removed using a flathead (or a Phillips head screwdriver in certain instances) screwdriver. It’s a good idea keep these screws safe so that you don’t lose them.
Once the handles that were previously used have been removed, the next step is to take off the loose spindle. You can do this by pounding the ends of the spindle using the hammer until it’s removed from its position inside the door. The new handle is then fitted by putting the spindle into the interior handle hole and the other end into the exterior handle hole. Once the handle is installed then tighten it by screwing back the screws. Then, test to ensure the lock and unlock mechanism works properly.
Unusual Weatherstripping
A damaged or cracked weatherstripping may let water and air get through your patio doors, compromising the comfort and energy efficiency of your home. It could let in moisture and create drafts, which will increase your heating and cooling costs. It’s easy to replace faulty weatherstripping without professional assistance. First, you must take off the old stripping by loosing its staples using a screwdriver or prying it with the help of a putty knife before lifting it off the door. Clean the area, and apply a layer of weatherstripping which is backed with foam seal. This will prevent leaks and enhance the comfort.
If your sliding patio door isn’t working as it should, you must to address the issue immediately to prevent further damage tilt and slide patio door repairs to ensure that they are functional for years to come. Depending on how severe the problem is the best option is an DIY solution or a repair/replacement by a professional may be the best choice.
The most common issues with sliding patio doors are dirty rollers due to debris in the tracks, misaligned wheels and a loose handle. These issues can usually be addressed through regular cleaning and maintenance like changing the track’s lubricant and adjust, and tightening the hardware. If these steps fail, it’s advisable to seek advice from a professional to make sure that your patio door repair company near me door is operating exactly as it should. Before you decide to replace or repair your patio door, be certain to verify its warranty information to confirm that it’s covered by the manufacturer’s warranty. This could save you money on repairs or replacements in the future.