Repairs to uPVC Windows
uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don’t rot or rust like aluminum or timber.
It is important to clean and oil UPVC doors and windows regularly. This will reduce repair costs and improve energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good shape.
Single-pane windows are relatively easy to replace and will usually fit into the frames that were previously in use very easily. If you have double glazed window repairs-paned windows that are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case you’ll need to source some plastic spacers to assist the new pane to fit correctly into the frame of the window.
If you’re planning to try to remove the window panes by yourself it is crucial to wear the appropriate safety equipment, including thick gloves and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled under.
It’s a good idea to seal the gap after the glass is removed. This will prevent drafts and water from entering your home until a professional comes out to fix the window repairs near me. This will also act as a barrier that will prevent any intruders from gaining entry into your home. If the gap between the window and the door is significant, you may want to use a security screen that also includes windows. This will give you the best of both.
2. Sagging
uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, over time, they can suffer from a variety of issues, including sagging. A window that isn’t properly aligned can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to shrink, it’s important to act quickly to stop the issue from worsening.
Repositioning the hinges can aid in fixing a window that is sagging. To accomplish this, you’ll need to open the window to access the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after having repositioned your hinges. If you’re satisfied with the fit of your window, tighten the screws to hold them in the right position.
If you are unable to reposition the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. It is essential to replace your seal as soon as you can in order to keep your upvc window repairs window watertight and draughtproof.
upvc window repair handles can also become loose. This is usually due to screws that have become undone over time, but it could be caused by the handle mechanism wearing out. It’s fairly simple to fix a loose uPVC hand. You’ll first need to close the window and then perform an experiment fitting. The corners of the sash should align with the casing joint. If it doesn’t then you can use a screwdriver to loosen the handle and then return the mechanism to its original position.
3. Water Leaks
If you wake up to damp floors and mouldy walls each time it rains, it’s important to take action. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hinder your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.
It is a fairly easy fix that can be done by any competent DIYer. Based on the severity of the problem the caulking used previously might need to be removed before a new layer is applied. It is important to remember that when it comes to uPVC window repairs you should avoid the temptation to «over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.
Check that any drainage holes are free of debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more severe instances, you may need to replace the window.
Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.
It is also important to note that if the leakage originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be at fault when your uPVC window is difficult to open or it opens in the breeze. These are easily repaired by any skilled DIYer and are usually done within a few minutes.
Like any mechanical part hinges are prone to be damaged over time. It is very easy to replace a hinge on a window but it’s much easier if someone helps hold the frame.
It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. You can do this by looking for the arrows on each hinge, this indicates the direction in which the window should open.
Window hinges that aren’t working properly can be caused by incorrectly opening the window a certain manner or because of improper installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are more than happy to offer suggestions.
It is also important to lubricate the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also reduce the chance of windows sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.
5. Draughts
Draughts in upvc window repair near me windows can be caused by a few different things. The hinges can also be disaligned as a result of wear, creating gaps where the sash and frame meet. These can be easily repaired by giving them good clean, but when they’re beyond repair, it could be necessary to have them aligned or replaced. Second, the interlock can be unbalanced. This happens on the hinge’s side, and may need to be cleaned. In some cases, it may be necessary to replace the hinges.
The next most common cause of draughts is the window seals, these can become worn down or damaged over time and allow air to escape through the gaps. Installing high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and will lessen draughts.
Another method of reducing draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. They can keep your home warm by blocking out cold air.
Your windows made of upvc will remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it could be more cost-effective to replace them instead of fixing them. If you have any problems with your window made of upvc it is recommended to speak with an expert as soon as you can.